THOMSON DD10, Installation Manual

Page: 101 / 179

6. Initial Installation Diamond digital
92
-Note: The figure shows the procedure by means of the control panel. For the
E-box it is the same procedure.
When performing the step CLEAR RAM FILES, it might be possible that
you are requested to clear only individual files. In this case, do not use
ALL but QUERY.
•
After having cleared the RAM files, the system performs an automatic restart.
Subsequently, the screen displays the superior Service menu.
6.11.6 ENTERING THE OPTION CODE
The following steps have to be carried out only if requested in the software informa-
tion readme.txt on the update disk.
Recall the MSKERMIT program and establish with ”C” <Enter> connection to the
switcher controller.
The screen displays the respective Service menu.
D30 Service Menu (Master) Ser. N0.: 100
–––––––––––––––––––––––––––––––––––––––
device: DD30–Box
user: COMMON
software version [V]
integrated error diagnosis [I]
DICMAC direct control and memory access [D]
halt normal operation
[H]
KERMIT file transfer [K]
change KERMIT user [U]
change device name [N]
show network [S]
install options [O]
*O
enter device specific option code:
options installed:
Entering a ”0” enables you to inquire the options already installed. The customized
code is contained in the Test Certificate which is enclosed by the manufacturer
in the switcher delivery.