THOMSON DD10, Installation Manual

Page: 40 / 179

3. Mounting the Electronics Box Diamond digital
31
3. MOUNTING THE ELECTRONICS BOX
Your equipment may be shipped in several different boxes, depending upton order
size and configuration.
Check the contents of each box against the packing list to ensure your order is
complete. If equipment is missing or damaged, contact the shipping company im-
mediately.
The electronics boxes of the switchers DD5, DD10, DD20 and DD30 are located
in a closed 19-inch frame which houses the individual plug-in cards of the video and
control electronics as well as the power supply units.
ATTENTION:
The device is orderly used when the electronics box is firmly incorporated
into an equipment cabinet in a studio or O.B. van and is connected to earth!
According to VDE, mobile application is not admissible.
3.1 MECHANICAL MEASUREMENTS
BTS
Electronics box for RMD 5 and RMD 10
19” = 483 mm
450 mm
5RU
470 mm
212 mm
WARNING
With the standard modules installed, the DD10 mainframe weights 41 kg
(44 lbs). During installation and until secured in the rack, use an appropriate
lifing device to lift and support the mainframe. Failure to follow this precau-
tion can result in injury to personnel and damage to equipment.