Theta Digital Casablanca II, Owner'S Manual

Page: 92 / 125

82
SETUP Function
This function provides access to a series of sub menus that will allow the configuration of the entire system.
Note : A complete step-by-step speaker configuration set up guide is located on page 15.
In this section, all features of the SETUP menu are discussed along with a diagram of most video monitor displays.
Pressing the SETUP button once changes the video display to the first page of the SETUP menu shown in figure 71.
The menu title is displayed in the upper left corner with the menu page
number.
Pressing button # 1 leads to a series of submenus that allow the user to
edit parameter values that are stored by input.
Button # 2 allows the user to edit parameter values that are global to
the entire Casablanca II. In other words, these are parameters that are
not stored by input select.
Button # 3 leads to all of the macro features.
Button # 4 allows the user to set a password on the SET-UP button
itself.
Button # 5 displays channel assignment information about the DACs.
Figure 71 - Video Display of the SETUP Menu
As indicated in figure 71, button # 1 is assigned to features that are stored by input and leads to a series of
categorized sub menus via 3 pages. Most pages, menus and all features are discussed in minor detail in this section,
and more in depth in their respective pages in the prior section of this manual,
FRONT PANEL OPERATIONS .
Setup Button Password
It is possible to password protect the entire SETUP function, or have
no password at all. Setting a password for the SETUP button is
accessed by pressing button # 4 , where the user will be asked “ ARE
YOU SURE YOU WANT TO ENTER A PASSWORD FOR THIS
MENU?
” Answering “ YES ” by pressing the A-D button will display the
message shown in figure 72.
Use buttons 1 - 6 to enter a password. After each digit is entered, the
flashing digit moves one character to the right. If no password is to be
used (factory default), press the
A-D button five times, which enters all
zeros. All zeros, or a zero anywhere in the password translates to no
password.
Figure 72 - Video Display of the
SETUP Password Page
CAUTION : It is imperative that your new password be written down. If it is forgotten, ALL access to the SETUP
menu will be permanently denied. Please see the WARNING on page 14.
DAC Configuration
Pressing button # 5 in the SETUP menu allows the user to view the channels assigned to each DAC card. This is an
information page only and not an editable menu. As an example, the first page will say “ LEFT FRONT CEN ” if a
three channel balanced DAC card is in position # 1. Press the A-D button to view which channels are assigned to the
second DAC card, and
A-D
once more for the third DAC card. Press
SET-UP
once to exit this menu.
The following section will discuss all menus and parameters under the INPUT button.