43
MODE Function
Pressing the
MODE
button (shaded in figures 16 and 17) once displays the first page of the
MODE
menu.
This first page consists of 6 different signal ‘processing’ modes, one of which can be selected and temporarily
applied to the currently selected input. A
right
arrow is displayed in the lower right corner of the LCD
indicating that there is an additional
MODE
page. Pressing the
A-D
button once will reveal this second page,
consisting of additional modes. Figure 16 shows the first
MODE
page and, figure 17 shows the second.
Note
: This entire menu allows the user to audition different modes when possible. It does not store the
changed mode. Therefore when a different
INPUT
SELECT
button is pressed, or the Casablanca II is
powered down, a
MODE
that is changed using this function will revert to its default. Since each
INPUT
SELECT
button can have its own
MODE
, the default mode for that
INPUT SELECT
is stored/edited in the
SETUP
/
INPUT
menu. Please refer to page 59 (Default Mode) for information on changing and storing the
MODE
for a given
INPUT SELECT
button.
* * *
Figure 16 - Front Panel Display of the MODE Page 1 Menu
Press button
1
-
6
to select the desired mode. The corresponding LED above buttons
1
through
6
will
illuminate.
Note
: If a specific feature such as Dolby Digital, DTS or Circle Surround is not installed in the Casablanca II,
selecting it in the
MODE
menu will result in the LCD displaying the following message:
OPTION NOT
INSTALLED
.
The first 6 modes shown
in figure 16 are described below.
Matrix (
MATX
): The signal routed to the center speaker is equal to the left plus right input signals and the
mono signal routed to the surround speakers is equal to left minus right signals. Crossing over any
speaker(s) produces a sub channel.
Special Matrix (
SPCL MATX
): A mode similar to Dolby Pro Logic with more ambience retrieval in the
surround speakers. Crossing over any speaker(s) produces a sub channel.
Dolby Pro Logic (
PRO
): When
PRO
is selected, Dolby Pro Logic decoding is implemented. Crossing over
any speaker(s) produces a sub channel.
Dolby Digital (
DIGTL
): (Optional). When this mode is selected, Dolby Digital (AC-3 5.1) decoding is
implemented. Please refer to page 62 for additional Dolby Digital setup options, selectable in the second
page of the
SETUP
/
INPUT
submenu. If any speakers are crossed over, their low pass signal will be routed to
the applicable sub channel(s) and be mixed with the LFE signal , if present.
If the Casablanca II detects a Dolby Digital 5.1 signal on the selected input jack, and the
MODE
is
not
set to
DOLBY
DIGITAL
, the Casablanca II will display the following message on both the LCD and video monitor**:
**RECEIVING DOLBY DIGITAL SIGNAL**
CHANGING MODE TO DOLBY DIGITAL
and display
DOLBY
DIGITAL
as the current mode. However, this is not stored and therefore approximately 5
seconds after the Casablanca II ceases to receive this signal, the
MODE
will revert back to the default mode
for that Input Select button. If the detected signal’s format is Dolby Digital 2.0, the same auto detecting
Summary of Contents for Casablanca II
