T
HERMO
F
ISHER
S
CIENTIFIC
S
S
S
S
S
ECTION
ECTION
ECTION
ECTION
ECTION
2
2
2
2
2
S
ETUP
AND
I
NSTALLATION
O
PERATING
G
UIDE
, TEOM 1405
2-19
2. Install the water trap filter and bracket into the two pre-drilled holes on
the side of the pump compartment (Figure 2-22).
3. Cut a 14-inch (.35m) piece of tubing from the 3-foot section that came
with the enclosure package. Place the pump in the enclosure, and
connect the elbow fitting on the pump (Figure 2-21) to the elbow
fitting on the inside of the pump compartment using the 14-inch piece
of tubing.
4. Locate and cut the piece of the 15m green tubing, that came in the
1405 packaging, into two pieces — one about (but not less than) 5m.
5. Install the one end of the 5m pump tubing into the quick-connect
fitting on the outside bulkhead wall of the pump compartment (behind
the water trap filter, Figure 2-22).
6. Place the 1405 unit into the enclosure install the other end of the 5m
tubing that is connected to the bulkhead into the quick-connect elbow
fitting for the pump connection on the back of the 1405 unit (Figure 2-
20).
Figure 2-22.
Figure 2-22.
Figure 2-22.
Figure 2-22.
Figure 2-22.
Water trap filter.
Pump compartment
bulkhead connection
Summary of Contents for TEOM 1405
Page 2: ......
