Thermo Scientific Spin Tissue Processor Microm STP 120
25
Microm International GmbH
part of Thermo Fisher Scientific
Otto-Hahn-Str. 1A
69190 Walldorf / Germany
387 718 - English
Press
START
. The
TIMER
pilot light will flash. The display is
dimmed showing the date and time at which the program will
start
.
Press the
STOP
key to halt:
n
the current program if it is running
n
the delay start timer, if programmed.
In each case, the microprocessor asks for confirmation of the
operation with the message:
(or the
TIMER
if it is activated).
Press
START
and the process will continue or the
TIMER
will
continue its down count.
Press
STOP
again and the process will be interrupted.
If the process is stopped use the
€
key to raise the basket holder
and remove the basket with the specimen holders. If necessary,
use the
•
key to move the basket holder to the position of reagent
vessel 1. Otherwise, when a new basket holder is loaded and
START
pressed to begin a program immediately, the carrousel will
automatically move to reagent vessel 1 before beginning the
process.
Under normal operating conditions, the program will stop in
paraffin bath 12, and issue a warning beep every five seconds. If
the program being run was P 01, the screen will display the
following message.
Press the
STOP
key to stop the program.
Then press the
€
key to raise the basket holder and remove the
basket with the infiltrated samples.
DANGER
The paraffin may be very hot. Take adequate precautions to
avoid burns.
NOTE
:
Start a new process
immediately
by placing the new basket in the
basket holder and pressing
START
to begin processing. The
carrousel automatically moves to reagent vessel 1 to begin the
process.
If the next process is to use the delay start
TIMER
, or the SPIN
TISSUE PROCESSOR is not going to be used until the next day,
the basket holder should be moved to reagent vessel 1 using the
•
key and lowered with the
€
key to prevent the reagents from
evaporating.
PROGRAM START
16/08/01
•08:00
Stopping the program
DO YOU REALLY WANT TO
STOP THE PROCESS?
End of the program
END OF PROGRAM
P 01
•
•