Thermo Scientific Sorvall WX+ Instruction Manual Download Page 83

Page: 83 / 145

3-4-1 Outputting and Reusing Run History Display and Run Parameters

(1) Checking and reusing Run History

Step

Touchscreen operation

Screen displays and notes

Press the

[Run History]

button

in the MENU screen.



The Run History is displayed in date order.



Press the

[<]

and

[>]

buttons to page through the Run

History screen page by page.



Press the

[<<]

and

[>>]

buttons to browse the Run

History screen 10 pages at a time.



Use the

[Top]

button to move to the top of the Run History

screen.

Press the row for the history
item in the Run History you
want more information on.



When a rotor is selected when loading for a new run, the

speed field will be displayed in gray. Pressing this field will

change the display in the following order: SPEED -->

RCFmax --> RCFavg.



In the history of ω

T operation, the run time field is

displayed in gray. Pressing this field will change the

display in the following order: TIME--> ω



When an alert occurs, the Stop condition field provides

details on the alert.

3-4-1 Outputting and Reusing Run History Display and Run Parameters

The centrifuge can automatically store a run history containing up to 5,120 run

parameters. The run history can be used for checking operation and for reuse,

verify user and rotor performance and output data in the CSV format.

●

The Run History Details

screen appears.

Speed

Run time

[Load for a new

run]

button

●

The Run History

screen appears.

3-60

Summary of Contents for Sorvall WX+


















































































































































Search results

Summary of Contents for Sorvall WX+

Reviews:

Related manuals for Sorvall WX+

Brands by name

Popular brands

Thermo Scientific Sorvall WX+, Instruction Manual

Search results

Summary of Contents for Sorvall WX+

Reviews:

Related manuals for Sorvall WX+

Brands by name

Popular brands