Thermo Scientific Orion 310 Instruction Manual Download | Manualshive

Page: 6 / 81

background image

PerpHecT

®

Orion 310, 320, 330 Instruction Manual

2

General Information

All meters are microprocessor-controlled and feature pH autocalibration,
patented digital LogR pH measurement mode, sealed keypads and large
easy-to-read LED displays.

These systems are ideal for busy, multi-user laboratories or plant
environments. pH measurements are easy with the help of advanced
features such as autocalibration, LogR mode, automatic temperature
compensation, choice of pH resolution and diagnostic operator
assistance codes.

The Orion 310 is a basic pH Meter which comes complete with a
PerpHecT combination glass pH temperature electrode. The choice of
a PerpHecT Ag/AgCl electrode (Orion 9202BN) or PerpHecT ROSS

™

electrode (Orion 8202BN) is available.

The Orion 320 is a pH/mV/ORP/Temperature Meter which comes
complete with a PerpHecT combination glass electrode. The choice of
a PerpHecT Ag/AgCl electrode (Orion 9202BN) or PerpHecT ROSS
electrode (Orion 8202BN) is available.

The Orion 330 is a pH/mV/ORP/Temperature Meter with RS232
interface for connections to a printer or a computer. It comes complete
with a PerpHecT combination glass electrode. The choice of a PerpHecT
Ag/AgCl electrode (Orion 9202BN) or PerpHecT ROSS electrode (Orion
8202BN) is available.

Using this Manual

Operating instructions for the Orion 310 are covered in Chapters III
through VII.

Operating instructions for the Orion 320 are covered in Chapters VIII
through XII.

Operating instructions for the Orion 330 are covered in Chapters XIII
through XVII.

«
...
4
5
6
7
8
...
»

Summary of Contents for Orion 310


















































































Reviews:

No comments

Related manuals for Orion 310

POCKET COLORIMETER II

Brand: Hach Pages: 188

Brand: Sage Pages: 68

GroundCast DRS611

Brand: Vaisala Pages: 12

Brand: Orange Electronic Pages: 21

Brand: Cecomp Pages: 4

Brand: Keller Pages: 8

Brand: Keysight Pages: 56

Brand: Eno Scientific Pages: 47

Radon Scout Home

Brand: SARAD Pages: 2

Backsense BS-9000-WD

Brand: Brigade Pages: 42

Brand: Cargo Data Pages: 3

Brand: GeoMax Pages: 14

Brand: Hanna Instruments Pages: 2

Brand: A&D Pages: 7

Brand: Parker Pages: 24

Brand: A&D Pages: 8

Brand: Trotec Pages: 7

Brand: TR-Electronic Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands