Thermo Scientific Orion 310 Instruction Manual Download | Manualshive

Page: 50 / 81

background image

PerpHecT

®

Orion 310, 320, 330 Instruction Manual

46

C. Manual pH Calibration

NOTE:

Manual calibration can be performed with

any user-selected buffer(s). The difference between
manual buffer values must be between 1 and 4 pH
units.

1. Attach electrode to meter.

2. Press the SETUP key. Press the YES key until SET or STD is

displayed. Choose the SET option and press the YES key.

3. P1 is displayed in the top readout. Using the SCROLL (

▲

,

▼

)

keys, set user-defined value for the first buffer and press the YES
key to accept new value.

4. Repeat for second buffer value (P2). Press the MODE key to return

to MEASURE mode.

5. Press the CAL key. CAL is displayed for 2 seconds. The last

calibration buffer range will be displayed. Use the SCROLL
(

▲

,

▼

) keys to select the SET option. Press the YES key to accept

this calibration. Pl is displayed. Place electrode into the first
calibration buffer. When READY light is displayed indicating
electrode stability, the user defined buffer value will be displayed.
Press the YES key to accept. P2 is displayed. Repeat for second
calibration buffer.

6. When the READY light comes on, press the YES key to accept

buffer value. SLP will be displayed while the calculated slope is
displayed.

7. Rinse electrode with deionized water and place in sample.

8. Record pH directly from the main meter display and temperature

from upper field when the READY light is displayed or when
electrode signal is stable.

General Information on pH Calibration for Orion 330

«
...
48
49
50
51
52
...
»

Summary of Contents for Orion 310


















































































Reviews:

No comments

Related manuals for Orion 310

Brand: Keithley Pages: 148

Brand: Valor Pages: 13

Brand: Campbell Pages: 31

Brand: 4iiii Pages: 3

Brand: Badger Meter Pages: 12

Brand: Badger Meter Pages: 16

Brand: Badger Meter Pages: 56

ModMAG M Series

Brand: Badger Meter Pages: 4

Brand: Kane Pages: 16

Brand: Kane Pages: 60

Brand: TC Electronic Pages: 20

EXTREME DUTY TPMS

Brand: Valor Pages: 2

CP-4900 Micro-GC

Brand: Varian Pages: 7

Brand: Vapotherm Pages: 2

Brand: Pasco Scientific Pages: 11

Brand: bmcm Pages: 5

Brand: Tektronix Pages: 48

Brand: Rae Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands