Thermo Scientific Orion 310, Instruction Manual

Page: 11 / 81

7
PerpHecT ® Orion 310, 320, 330 Instruction Manual
BNC
Input
Recorder
ATC
RS232
Line Cord
Input
Reference
Input
Figure 4 — PerpHecT Orion 330 Connections
Chapter III
Orion 310 Meter SetUp
A. Power Source
All PerpHecT meters are designed to operate with a line adaptor
(Orion 020125) for 110V operation or (Orion 020130) for 220V operation.
Plug the line adaptor securely into the meter’s Line Adapter Input, then
plug into an appropriate wall outlet.
B. Electrode Connection
1. Electrode
Attach the PerpHecT pH electrode or other pH electrode with BNC
connector to the BNC input on the meter by sliding the connector
onto the BNC input, then push in and turn clockwise to lock into position.
Electrodes with U.S. Standard connectors may be used with a an adaptor
(Orion 090033). Connect reference electrodes with pin tip connectors by
pushing connector directly into reference input.
See
Figure 4 .
2. ATC Probe
Attach ATC probe to the ATC input by sliding the connector straight in
until firmly in place. Use Orion ATC probes Orion 927006
or 927005 only.
Orion 310 Meter SetUp