Thermo Scientific KingFisher Duo, User Manual

Page: 67 / 84

Technical Specifications
In conformity with the requirements
Thermo Fisher Scientific Thermo Scientific KingFisher Duo User Manual 65
KingFisher Duo conforms to the following requirements:
2006/95/EC (Low Voltage Directive)
2004/108/EC (Electromagnetic Compatibility Directive, EMC)
FCC Part 15, Subpart B/Class B (July 2004)
2002/96/EC (Waste of Electrical and Electronic Equipment)
2002/95/EC (RoHS Directive – Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment)
2006/42/EC (Machinery Directive)
The safety specifications are also met under the following environmental
conditions in addition to or in excess of those stated in the operating conditions:
Altitude Up to 2000 m
Tempe5
°
C to +40
°
C
Humidity Maximum relative humidity 80% for temperatures up to 31
°
C
decreasing linearly to 50% relative humidity at 40
°
C
Mains supply
fluctuations
±
10% from nominal
Installation category
(overvoltage category) II according to IEC 60664-1 (see Note 1)
Pollution degree 2 according to IEC 60664-1 (see Note 2)
Note 1) The installation category (overvoltage category) defines the level of
transient overvoltage which the instrument is designed to withstand safely.
It depends on the nature of the electricity supply and its overvoltage
protection means. For example, in CAT II which is the category used for
instruments in installations supplied from a supply comparable to public
mains, such as hospital and research laboratories and most industrial
laboratories, the expected transient overvoltage is 2500 V for a 230 V
supply and 1500 V for a 120 V supply.
2) The pollution degree describes the amount of conductive pollution
present in the operating environment. Pollution degree 2 assumes that
normally only nonconductive pollution, such as dust, occurs with the
exception of occasional conductivity caused by condensation.
▲