Thermo Scientific Ion 520 User Manual Download Page 53

Page: 53 / 78

Pull straight up on the tool while holding the nucleotide reagent cartridge down.

Remove the scrubber from the cartridge tool, then dispose of the scrubber according to applicable
hazardous waste regulations.

The remaining nucleotide reagent cartridge should be disposed of appropriately.

Recycle Ion S5

™

ExT Wash Solution and Ion S5

™

Cleaning Solution bottles

The Ion S5

™

ExT Wash Solution and Ion S5

™

Cleaning Solution bottles are made of recyclable plastic.

Open the expended bottle by unscrewing the cap.

Remove the cap, sipper, and filter, then pour any residual liquid into an appropriate receptacle.

Rinse the empty bottle with water. Pour out the rinse water into the same liquid waste receptacle.

Recycle or dispose of the clean bottle, cap, sipper, and filter according to applicable regulations.

Chapter 6

Start the sequencing run

Reagent consumables disposal

Ion 520

™

& Ion 530

™

ExT Kit − Chef User Guide

Summary of Contents for Ion 520















































































Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands

Thermo Scientific Ion 520, User Manual

Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands