Thermo Scientific Ion 520 User Manual Download Page 56

Page: 56 / 78

Remove, then discard the box of used pipette tips from the waste tip position.

IMPORTANT!

Handle the disposable reservoir in the waste tip position with care. During the run,

liquid waste collects in the reservoir. Dispose of the liquid waste by tipping the reservoir on one
corner and pouring the waste into an appropriate waste container:

IMPORTANT!

Do not reuse the waste pipette tip rack. Always move the empty Ion S5

™

ExT Tip

Cartridge from the new tip position to the waste tip position.

Move the empty Ion S5

™

ExT Tip Cartridge to the waste tip position.

Remove, then discard the

• Ion S5

™

ExT Chef Reagents cartridge

• Ion S5

™

Chef Solutions cartridge

• Enrichment Cartridge v2

Remove, then discard the consumables from the Recovery centrifuges, including the:

• Recovery Station Disposable Lid v2
• Recovery Tubes v2

Remove the Chip Balance from the Chip-loading centrifuge. Do not discard.

Close the Chip-loading centrifuge lid.

Chapter 7

Clean the Ion Chef

™

System

Clean the Ion Chef

™

Instrument

Ion 520

™

& Ion 530

™

ExT Kit − Chef User Guide

Summary of Contents for Ion 520















































































Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands

Thermo Scientific Ion 520, User Manual

Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands