Thermo Scientific Ion 520 User Manual Download Page 58

Page: 58 / 78

Dry the centrifuge and buckets with lint-free wipes.

Install the centrifuge buckets, then close the Recovery centrifuge cover.

Buckets (cleaned and installed)

Start the cleaning

Close the instrument door by first lifting it up slightly to disengage the locking mechanism, then
pushing down on the door until the locks engage.

IMPORTANT!

Before closing the door, ensure the covers of the Chip-loading and Recovery

centrifuges are closed.

To start the cleaning, tap

Next

on the Ion Chef

™

Instrument touchscreen that appears after run

completion.

Note:

You can also clean the instrument at any time starting from the home touchscreen. Tap

Settings

Clean Ion Chef

Chapter 7

Clean the Ion Chef

™

System

Clean the Ion Chef

™

Instrument

Ion 520

™

& Ion 530

™

ExT Kit − Chef User Guide

Summary of Contents for Ion 520















































































Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands

Thermo Scientific Ion 520, User Manual

Search results

Summary of Contents for Ion 520

Reviews:

Related manuals for Ion 520

Brands by name

Popular brands