4.
Save method.
To save the method to the instrument Library or disk, press the
Save
Method
function key and follow the on screen instructions.
5.
Load a method from the instrument Library or from disk.
To do this, press the function key or press Library.
6.
Remove any unwanted samples from sample compartment.
7.
Insert a suitable reference, if required, and close the lid of the
sample compartment.
8.
Press
Zero
to measure a baseline.
9.
Open lid of the sample compartment and insert the sample and
then close the lid.
10.
Press
Run
.
The Scan Graph page will appear.
11.
Press the
Manipulate
function key to open the Manipulate menu
and choose the post run manipulation required.
Thermo Fisher Scientific
Evolution 300 and Evolution 600 User Guide 43