Thermo Scientific Evolution 300 User Manual Download Page 13

Page: 13 / 86

Installation

Reference position
cell holder

Sample position
cell holder

Spring loaded

toggle

Finger hole

Pin B

Pin A

Pin B

Pin A

Open the main lid of the sample compartment and remove any
accessory that may be present in the sample (front) position.

Position the accessory so that the holes towards the rear are aligned
over pins A and B in the instrument.

When properly aligned, gently push the front end of the accessory
downward until plate snaps into place under the toggle.

This positive location system ensures that the accessory is correctly
aligned in the corresponding optical beam.

For removal of the accessory:

•

Grip the accessory through the finger hole in the accessory and pull
it upwards.

•

For accessories with no finger hole, grip the accessory using the
handles.

Thermo Fisher Scientific

Evolution 300 and Evolution 600 User Guide 9

Summary of Contents for Evolution 300























































































Search results

Summary of Contents for Evolution 300

Reviews:

Related manuals for Evolution 300

Brands by name

Popular brands

Thermo Scientific Evolution 300, User Manual

Search results

Summary of Contents for Evolution 300

Reviews:

Related manuals for Evolution 300

Brands by name

Popular brands