Thermo Scientific
3-1
3
Pre-Installation
Unpacking
Carefully unpack and inspect the unit and all accessories for damage, if you find
any damage, keep the packing materials and immediately report the damage to
the carrier. We will assist you with your claim, if requested. Do not return goods to
Thermo Fisher Scientific without written authorization. When submitting a claim for
shipping damage, request that the carrier inspect the shipping container and
equipment.
Furnace Assembly
The furnace is shipped completely assembled with all heating elements and the
thermocouple installed. Power connection wires to the furnace are not provided.
Inspect the furnace as follows:
1. Check to make sure all packaging materials have been removed from the
furnace.
2. Unscrew and remove the furnace top access panel and visually inspect the
thermocouple and thermocouple lead wire.
connections (refer to
Figure “Laboratory Box Furnaces” and Figure
). Tighten if necessary.
The red thermocouple extension lead is always negative.
Failure to check thermocouple wiring connections before initial
start up could result In damage to the furnace.
Summary of Contents for BF51634BC-1
