86
TK 56430-18-IP-EN
a. If the configuration file you are loading is different than the configuration file currently on the controller, a
confirmation window will appear asking if you want to change the settings.
14. Click yes and a communication window will appear. Once the new configuration file has been loaded, the
communication window will disappear and the settings window should show the name of the new configuration file
loaded.
15. Click close the settings window and close down WinTrac. Disconnect power to the unit by turning the truck ignition
off and/or unplugging the unit from shore power.
16. Verify that the correct configuration was stored by re-powering the controller and re-connecting to WinTrac.
17. Delete the .csv configuration file saved to the desktop during the loading procedure.
IIm
mp
po
orrtta
an
ntt:: Configuration files get updated periodically and new files should be downloaded every time to verify the
most recent version is being used.
