66
TK 56430-18-IP-EN
Parallel Crimp Connectors with Heat Shrink Tubing
IIm
mp
po
orrtta
an
ntt:: All parallel crimp connectors must be sized for the correct gauge wires.
Always follow these procedures when making a parallel crimp connection:
1. Strip both wires .50 in. (12 mm).
2. Slide shrink tubing onto wire away from joint.
3. Position wires side-by-side inside crimp.
4. Crimp securely using correct crimper tool.
5. Slide heat shrink tubing over joint and apply heat.
