TK 56430-18-IP-EN
69
1. Attach the in-line fuse to the
2
and the
BAT
wires by following the
parallel crimp connector procedures in this section.
2. Strip in-line fuse wire end .50 in. (12 mm).
3. Slide shrink tubing onto wire and move it away from the wire end.
4. Install proper size terminal lug and crimp securely using correct
crimper tool.
5. Position heat shrink tubing over lug so it does not interfere with
connection and apply heat.
6. Attach fuse terminal securely onto the positive battery connection.
