Thermo Hybaid PX2 User Instruction Manual Download Page 36

Page: 36 / 84

5. Scroll through the possible program locations using the

PREVIOUS

and

NEXT

softkeys and

press

COPY

. All empty file locations are marked as empty. It is possible to overwrite full program

locations. A confirmation screen checks whether you wish to overwrite the data; press

COPY

ABORT

as desired.

Erasing an Existing Program

Programs or complete directories may be erased to vacate program space for future use.

1. Select

PROG

from the Main Menu and then use the

RIGHT

arrow key to move the cursor to

ERASE

from the program menu. Press

ENTER

to select.

2. Again use the

RIGHT

arrow key to move the cursor to

ERASE

PROG

and press

ENTER

select.

3. Select the directory containing the relevant program by moving the cursor with the

and

DOWN

softkeys and press

ENTER.

4. Use the

PREVIOUS

and

NEXT

keys to choose the relevant program and press

ERASE.

5. A final confirmation screen allows you either

KEEP

ERASE

the program.

5.4 Advanced Edit Features

The Advanced Edit features allow the creation of more complex cycling protocols in order to enhance

experimental data. It is possible to program:

•

An incrementation or decrementation of both time and temperature on a cycle-by-cycle basis.

•

The rate at which the temperature changes between two given temperatures.

•

Gradient steps for gradient compatible blocks.

Advanced Edit features are accessed by pressing the

ADVANCED

softkey at the temperature step

at which the function is to take effect. If Advanced Edit data already exists for any step -

<ADV>

indicated on the screen.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PX2





















































































Search results

Summary of Contents for PX2

Reviews:

Related manuals for PX2

Brands by name

Popular brands

Thermo Hybaid PX2, User Instruction Manual

Search results

Summary of Contents for PX2

Reviews:

Related manuals for PX2

Brands by name

Popular brands