© Thermo Hybaid. Issue 1.0, January 2002
24
9. Enter any changed cycle number or hold temperature values. Press
ENTER
to proceed to the
next stage.
10. Edit steps in further stages as required. Once changes are completed the
SAVE
button can be
pressed to access the save screen.
11. Press the
SAVE
softkey to save changes or
IGNORE
to keep the original program. Pressing
MENU
at anytime aborts the editing.
Viewing an Existing Program
It is possible to view existing programs without altering the information contained within them.
1.
Select
PROG
from the Main Menu and then use the
RIGHT
arrow keys to move the cursor to
VIEW
from the program menu. Press
ENTER
to select.
2.
Use the
UP
and
DOWN
softkeys to select the appropriate directory and then press
ENTER
.
3.
Use the
PREVIOUS
and
NEXT
softkeys to select the program and press
ENTER.
4.
Use the
NEXT
softkey to scroll through the program information. Press
QUIT
or
MENU
at
any time to return to the Main Menu.
Copying Programs
Copying programs is necessary in, for example, modifying the pre-set programs described in
Appendix V.
1. Select
PROG
from the Main Menu and then use the
RIGHT
arrow keys to move the cursor to
COPY
from the program menu. Press
ENTER
to select.
2. Move the cursor using the
UP
and
DOWN
softkeys to select the
source directory
and press
ENTER
.
3. Choose the program to be copied by using the
PREVIOUS
and
NEXT
softkeys and press
ENTER
to select.
4. Move the cursor using the
UP
and
DOWN
softkeys to select the
target directory
and press
ENTER
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
