Thermo Hybaid PX2 User Instruction Manual Download Page 19

Page: 19 / 84

2.2 Symbols & Conventions

The Px2 has been designed for safe operation. The following symbols appear on the unit and their

meanings should be noted.

Indicates the ON position of the main power switch.

Indicates the OFF position of the main power switch.

Consult the manual for further information.

Consulter les documents d’accompagnement.

WARNING:

Indicates a heating hazard. Proceed with caution to avoid burn injury.

ATTENTION:

Surface chaude.

SAFETY NOTE:

This symbol indicates high voltage. Risk of electric shock.

AVERTISSEMENT:

Risqué de choc éléctrique.

In addition, the following conventions are adopted in the manual in respect of indicating safety hazard:

SAFETY NOTE: indicates a potentially hazardous situation, which could result in

death or serious injury.

WARNING: indicates a potentially hazardous situation, which could result in minor

or moderate injury to the user or damage to the instrument.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PX2





















































































Search results

Summary of Contents for PX2

Reviews:

Related manuals for PX2

Brands by name

Popular brands

Thermo Hybaid PX2, User Instruction Manual

Search results

Summary of Contents for PX2

Reviews:

Related manuals for PX2

Brands by name

Popular brands