SAVE/LOAD OPERATION
52
MANUAL 430429-490
4.04 SAVE/LOAD Data
Parameters accessed during a SAVE/LOAD operation
.
During a SAVE/LOAD operation, all welding parameters are
stored/retrieved. For example, if the welder chooses to save a
MIG program, all other parameters for other modes of
operation such as STK/LFT/SCR/CAC are saved as well.
When a SAVEd program is LOADed, all parameters for other
modes of operation are loaded as well. The operator may have
to press the ‘PROCESS KEY’ (5) to return to the desired mode.
Table 4. SAVE/LOAD Data
A/V
Hot Start
Hot Cur.
STICK MODE
Arc Control
A/V
Pulser
Pulse Freq
Pulse Width
Back Cur.
Sloper
Init Cur.
Final Cur.
Up Slope
LIFT TIG MODE
Down Slope
A/V
Pulser
Pulse Freq
Pulse Width
Back Cur.
Sloper
Init Cur.
Final Cur.
Up Slope
SCRACH TIG MODE
Down Slope
CARBON ARC CUTTING MODE
A/V
A/V
Inductance
MIG MODE
Material
