SETUP FOR OPERATION
28
MANUAL 430429-490
6. When you sequence through the welding modes and reach the last mode,
the list will wrap back to the top of the list.
NOTE
Once you turn off the power supply, it records the welding mode at that
time into the memory. Next time, you turn on the machine; it
automatically recalls the proceeding welding mode, which you finished
the last time.
Setting of the Welding Parameter
1. Pressing the ‘SELECT KEY’ will illuminate the ’LCD DISPLAY’ (10).
2. Press the ‘SELECT KEY’ until the desired parameter is displayed.
3. Press the ‘UP/DOWN KEY’ to modify the parameter.
NOTE
Once you turn off the power supply, it records the welding mode at that
time into the memory. Next time, you turn on the machine; it
automatically recalls the proceeding welding mode, which you finished
the last time.
STICK MODE(DEFAULT)
LIFT TIG MODE
SCRATCH TIG MODE
CARBON ARC CUTTING
MIG WELDING
Figure 5. Welding Process Flow
Chart
