v
Themis Computer
NanoPAK
®
User Manual
4.
Store electrostatic-sensitive boards in protective packaging or on conductive
foam.
Grounding Methods
Guard against electrostatic damage at workstations by following these steps:
1.
Cover workstations with approved anti-static material. Provide a wrist strap
connected to a work surface and properly grounded tools and equipment.
2.
Use anti-static mats, heel straps, or air ionizers to give added protection.
3.
Handle electrostatic-sensitive components, boards, and assemblies by the case
or the PCB edge.
4.
Avoid contact with pins, leads, or circuitry.
5.
Turn off power and input signals before inserting and removing connectors or
test equipment.
6.
Keep the work area free of non-conductive materials such as ordinary plastic as-
sembly aids and Styrofoam.
7.
Use field service tools, such as cutters, screwdrivers, and vacuums that are con-
ductive.
8.
Always place drives and boards PCB-assembly-side down on the foam.
Summary of Contents for NanoPAK
