Themis NanoPAK, User Manual

Page: 130 / 156

A-14
Themis Computer
NanoPAK
®
User Manual Version 1.0
Table A-6. Battery/LED Card Solder Bead Settings
Name Category Description
Factory
Default
Setting
SB13,
SB26 CPU-SET Only ONE of those two solder beads shall be installed at any given
time. They define what power range is applied to the logic on the
add-on (Battery/LED) card (P/N 118445-L01) plugged into the
Nanopack SBC carrier Gen2 (118446-L01 or 118447-L01).
There are therefore two configurations
SB13 INSTALLED and SB26 NOT INSTALLED to apply 5V.
SB13 NOT INSTALLED and SB26 INSTALLED to apply 3.3V.
The factory configuration shall be:
SB13: NOT INSTALLED
SB26: INSTALLED (3.3V)
SB13, SB26
SB26 See SB13 SB26