Themis NanoPAK, User Manual

Page: 20 / 156

NanoPAK
®
User Manual Version 1.0
xviii
Themis Computer
view and Specifications", of this manual.
Themis Computer values its customer comments and opinions; therefore, a “Reader
Comment Card” is located at the end of this manual for your use. Please take the
time to fill out this card with any comments concerning Themis products and ser-
vices, and return it to Themis Computer. Your comments may also be forwarded to
Themis by sending email to
docfeedback@themis.com .
Before you begin, carefully read each of the procedures in this manual. Serious dam-
age can be caused by improper handling of the equipment.
Intended Audience
This manual is written for system integrators and programmers. It contains all neces-
sary information for installation and configuration of the NanoPAK
®
and assumes
the BIOS program code is installed in the system Flash memory.
Although all specific hardware features are described in the installation manual, pro-
grammers wishing to write code for the NanoPAK
®
without the benefit of an operat-
ing system or real-time kernel will require additional data sheets.
Unpacking
Remove the NanoPAK
®
and accessories from the shipping container and check the
contents against the packing list. Be certain to observe industry-standard ESD pro-
tection procedures when handling static-sensitive components. The package should
include all elements of your order.
Please report any shipping discrepancies to the Themis Computer Customer Support
group immediately:
support@themis.com or 1-510-252-0870.
Caution: The NanoPAK
®
contains statically sensitive components. Industry-stan-
dard antistatic measures must be observed when removing the equipment from its
shipping container and during any subsequent handling. A wrist strap provides
grounding for static electricity between your body and the chassis of the system
unit.