Themis NanoPAK, User Manual

Page: 33 / 156

2-1
Themis Computer
2RES-31XR3
2
Installation and Operation
This chapter provides detailed information about the NanoPAK
®
installation, operat-
ing status indications, and input/output ports.
2.1 Applying Power
The NanoPAK
®
requires an input voltage b18 and +36 VDC. Voltage is
converted to +12VDC, -12VDC, +3.3VDC and +5VDC. These voltages are present
on the power rails as long as input voltage is applied.
Caution: When the I/O cable is attached, if the power is already applied to the
power contacts, power will be applied to the system. Before connecting the I/O Ca-
ble, insure that no power is applied to the power contacts. Take care to apply power
after the I/O Cable is attached. Attaching the cable with power on the contacts could
cause damage to the system
2
Installation
Section
Chapter