Themis NanoPAK, User Manual

Page: 104 / 156

4-22
Themis Computer
NanoPAK
®
User Manual Version 1.0
• Plug & Play O/S = NO
when set to NO, the BIOS configures all devices in the system. If set to YES, and
the OS supports Plug & Play, then rebooting the system is not required after the OS
finishes configuration of the plug and play devices.
• PCI Latency Timer
Value in units of PCI clocks for PCI device latency timer register.
• Allocate IRQ to PCI VGA = YES
When to ES will assign IRQ to PCI VGA card if the card requests an IRQ. When
set to NO the BIOS will not assign an IRQ to PCI VGA card even if the card
requests it.
• Palette Snooping = Disabled
This item is designed to solve problems caused by some non-standard VGA cards.
• PCI IDE BusMaster = Enabled
When set to enable BIOS, it uses PCI bus mastering for reading/writing to IDE
devices.
• OffBoard PCI/ISA IDE Card = Auto
Some PCI IDE cards may require this to be set to the PCI slot number that is hold-
ing the card. When set to Auto, it will work for most PCI IDE cards.
• IRQ3 / 4 / 5 / 7 / 9 / 10 / 11
This item allows users to respectively assign an interruptive type for IRQ3, 4, 5, 7,
9, 10, 11.
• DMA Channel0 / 1 / 3 / 5 / 6 / 7
When set to Available, will allow specified DMA to be available to be used by
PCI/PnP devices. When set to Reserved, will allow specified DMA to be reserved
for use by legacy ISA devices.
• Reserved Memory Size
This item allows users to reserve a specific size of memory block for legacy ISA
devices.