PROVIDENCE INSERT
PELLET STOVE
5
building code department before you begin your
installation. Obtain a building permit in order to
meet local building code requirements.
Contact your local dealer if assistance is required
before, during and after installation.
Before Start-Up Check List
1. All Safety Warnings have been read and
followed.
2.
The Owner’s Manual has been read.
3. Floor protection requirements have been
adhered to.
4. All venting has been properly installed.
5. The proper clearances from the stove and
chimney to combustible materials have been
followed.
6. The masonry chimney has been inspected by a
professional and is clean, or the factory built
zero clearance fireplace is installed according to
the manufacturer’s instructions.
7. A grounded power outlet with a surge protector
is available nearby without having to use an
extension cord.
Summary of Contents for providence
