Thelin providence, Owner'S Manual

Page: 14 / 41

PROVIDENCE INSERT PELLET STOVE
14
Note: Above installation examples are for reference. All installation must follow local codes and requirements.
Additional Venting
Your Thelin PROVIDENCE Insert is equipped with a blocked flue/high temp safety sensor that will shut the
stove off if there is a down draft, blocked flue, or high temperature condition.
If you install the stove on the side of the house that is hit by prevailing winds (usually 30 to 40 mph or greater)
there is a chance that the sensor will be activated and the stove will shut off. The solution to this problem is to
run the pipe up vertically through the eave and use a high wind cap on the vertical termination.
Outside Air Hook-Up
Make sure a rodent guard is used after penetrating the outside wall. Source a wall thimble with a built-in outside
air hook-up and rodent guard screen.
3C- Horizontal vent without outside air 3D- Horizontal vent with outside air