background image

 

117 

they have is not the original, so that any problems introduced by others will not 
reflect on the original authors' reputations. 
 
Finally, any free program is threatened constantly by software patents.    We wish to 
avoid the danger that redistributors of a free program will individually obtain patent 
licenses, in effect making the program proprietary.    To prevent this, we have made 
it clear that any patent must be licensed for everyone's free use or not licensed at 
all. 
 
The precise terms and conditions for copying, distribution and modification follow. 
 

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 

 
0.

 

This License applies to any program or other work which contains a notice placed 
by the copyright holder saying it may be distributed under the terms of this 
General Public License.    The "Program", below, refers to any such program or 
work, and a "work based on the Program" means either the Program or any 
derivative work under copyright law: that is to say, a work containing the 
Program or a portion of it, either verbatim or with modifications and/or 
translated into another Language.    (Hereinafter, translation is included without 
limitation in the term "modification".)    Each licensee is addressed as "you". 

 

Activities other than copying, distribution and modification are not covered by 
this License; they are outside its scope.    The act of running the Program is not 
restricted, and the output from the Program is covered only if its contents 
constitute a work based on the Program (independent of having been made by 
running the Program). 
 
Whether that is true depends on what the Program does. 

 
1.

 

You may copy and distribute verbatim copies of the Program's source code as 
you receive it, in any medium, provided that you conspicuously and 
appropriately publish on each copy an appropriate copyright notice and 
disclaimer of warranty; keep intact all the notices that refer to this License and 
to the absence of any warranty; and give any other recipients of the Program a 
copy of this License along with the Program. 

 

You may charge a fee for the physical act of transferring a copy, and you may at 
your option offer warranty protection in exchange for a fee. 

 
2.

 

You may modify your copy or copies of the Program or any portion of it, thus 
forming a work based on the Program, and copy and distribute such 
modifications or work under the terms of Section 1 above, provided that you also 
meet all of these conditions: 

 

a)

 

You must cause the modified files to carry prominent notices stating that you 
changed the files and the date of any change. 

 
b)

 

You must cause any work that you distribute or publish, that in whole or in 
part contains or is derived from the Program or any part thereof, to be 
licensed as a whole at no charge to all third parties under the terms of this 
License. 

 
c)

 

If the modified program normally reads commands interactively when run, 
you must cause it, when started running for such interactive use in the most 
ordinary way, to print or display an announcement including an appropriate 
copyright notice and a notice that there is no warranty (or else, saying that 
you provide a warranty) and that users may redistribute the program under 

Summary of Contents for N12000 series

























































































































Reviews: