Thecus 1U4500R User Manual Download Page 13

Page: 13 / 92

Chapter 3: First Time Setup

Overview

Once the hardware is installed, physically connected to your network, and
powered on, you can configure the 1U4500 so that it is accessible to your

network users. There are two ways to set up your 1U4500: using the Thecus
Setup Wizard or the LCD display. Follow the steps below for initial software

setup.

Thecus Setup Wizard

The handy Thecus Setup Wizard makes configuring 1U4500 a snap. To configure
the 1U4500 using the Setup Wizard, perform the following steps:

Insert the installation CD into your CD-ROM drive (the host PC must be

connected to the network).

The Setup Wizard should launch automatically. If not, please browse your
CD-ROM drive and double click on Setup.exe.

NOTE

For MAC OS X users, double click on Thecus Setup

Wizard 1.1.6.dmg

The Setup Wizard will start and automatically detect all Thecus storage
devices on your network. If none are found, please check your connection

and refer to

Chapter 8: Troubleshooting

for assistance.

Select the 1U4500 that you like to configure.

admin

”.

Summary of Contents for 1U4500R





























































































Search results

Summary of Contents for 1U4500R

Reviews:

Related manuals for 1U4500R

Brands by name

Popular brands

Thecus 1U4500R, User Manual

Search results

Summary of Contents for 1U4500R

Reviews:

Related manuals for 1U4500R

Brands by name

Popular brands