H-Genie
®
User Manual
v. 1.7.
page:17 of 29
hydrogen may also be released and make a noise. This is completely normal and you
shouldn’t be alarmed.
•
The H-Genie
®
is designed to run on a single tank of water for a minimum of 12
hours at maximum consumption. Before running out of water the below warning
screen will appear. Once the water level of the H-Genie
®
reaches the critical
level, an error message will appear and the H-Genie
®
will shut down to ensure
the hydrogen generation cell is not harmed.
Figure 15: Warning and Emergency stop low water tank message
The external vessel attached to the H-Genie
®
must be at 1 bar or the H-Genie
®
will not allow the reaction to proceed.
5.1
Setting a BATCH reaction
5.1.1 Connect your batch reactor to the front of the H-Genie
®
using the appropriate
tube and connection. Ensure there are no leaks and connections are tight.
5.1.2 Press the BATCH function on the main screen.
Please note!
