H-Genie
®
User Manual
v. 1.7.
page:16 of 29
Figure 13: Self-test is ready to start
The screen will then change to the following, while the system will run through a self-
test in order to check that the internal H-Genie
®
hydrogen system can build pressure
to the maximum settable limit. Do not switch the H-Genie
®
off while the system is
initializing. During this time a small amount of hydrogen may sporadically release. This
is normal. The self-test may last as long as 10 minutes.
Figure 14: Initialization screen and Ready screen.
Once the system has finished the self test and the initializing, the main screen will
appear and the term „Ready” will appear in the status bar. You’re ready to get started.
During hydrogen production, the H-Genie
®
will, from time to time, release the water
extracted from the hydrogen gas out the back of the system. A small amount of
Please note!
