Thales VesseLINK Certus 200, User Manual

Page: 57 / 131

4-21
User Manual PN 84469 Rev L
Table 4-5 Settings

Satellite
Section Value
Domain Whitelist & BlackList
Domain
Blocking Mode OFF / Blacklist / Whitelist ( OFF is the default setting)
Blacklisting Enabling allows ALL websites EXCEPT those listed (very little restriction)
Whitelisting Enabling blocks ALL websites EXCEPT those listed (the most restriction)
Port Blocking
Port Blocking Disabled / Enabled ( Disabled is the default setting)
Whitelist Service With Port Blocking Enabled, this allows for certain essential services
(Location Services, Emergency Services, and the Remote API) to stay
whitelisted/active and not be blocked. Check the services that are to stay
active. The whitelisted port is updated if the configured port for that service
is changed.
Port Whitelist Enter the Starting Port and Ending Port number.
Select the applicable protocol (
TCP & UDP or TCP only or UDP only)
(TCP & UDP is the default setting)
Data Usage
System Data
Usage Warning
Threshold Data limit in kB (1000 bytes), 0 means no data and -1 means unlimited
data. Setting data limits is for information purposes only. No data
restrictions will occur by setting limits.
Reset Day Enter the day of the month when usage should be reset, 0 means no reset
NOTE
Setting data limits is for information purposes only. Data figures
are an approximation of data usage. Actual data usage should be
provided by the service provider. Data will not be restricted if
the limit is reached or exceeded. An alert will be generated
saying that the limit has been reached.
Wi-Fi
The Wi-Fi page shown in Figure 4-25 allows setup of the Wi-Fi service.