Thales VesseLINK Certus 200, User Manual

Page: 52 / 131

4-16
User Manual PN 84469 Rev L
Sending an EMERGENCYMESSAGE:
To send an EMERGENCY MESSAGE, press SEND EMERGENCY. A pop-up screen will
appear asking you to confirm that you want the message to be sent. Select YES, SEND
EMERGENCY to send or NO CANCEL to abort the message.
Figure 4-20 Confirmation Required – Send an Emergency Message
NOTE
No external indication is given when emergency is activated.
This discretion is for user safety in emergency situation. The
only indication of an emergency will be in management portal
under Emergency menu item.
NOTE
An emergency phone call can be made by using the optional
Thales SureLINK IP Handset. Configuration of the phone
number to be called, as well as, the activation and cancellation of
the call takes place on the handset itself. Nothing is set up for the
phone call through the Management Portal.
Settings
The Settings tab of the portal is the most important section for customizing user configurations
and feature settings. It is also advised that only experienced personnel change these settings as
they may adversely affect functionality if not set correctly. These settings are under password
control to prevent unauthorized personnel from making changes to the system.
General
From the General page, change passwords and enable (or disable) external API access, as shown
in Figure 4-21 and Table 4-3.
There are four access levels to the system. Three of them are under password control. The
passwords are managed in the Change Password section:

GUEST: User only account, no password, read only access.

ADMIN: Password capability, FULL access through the Thales Management Portal via
local LAN (or wireless) connection.

WAN ADMIN: Password capability, FULL access to all data and settings remotely via
WAN port or over the Iridium network.

WAN USER: Password capability, read only access to some API data remotely via WAN
port or over the Iridium network.