Chapter 5: Configuration Items
Configuration Item
Meaning
ET_HSM_NETCLIENT_CONNECT_TIMEOUT_SECS
Number of seconds before a connection attempt is timed out.
Default=
60
ET_HSM_NETCLIENT_TRACE_DATA
=[ON|OFF]
If
ON
, user data will be traced.
Default=
OFF
ET_HSM_NETCLIENT_TRACE_LEVEL
The amount of trace to be generated.
Valid values are:
>
0
- Error only
>
1
- Include connections status
>
2
- Include API call flow
Default=
0
Network Mode Server Configuration Items
The available server configuration items for Network mode and their default values are listed in the following
table.
NOTE
Thales recommends leaving configuration items at the their default value or setting
them to a valid value specified in the following table. If the value of a configuration item must
be changed and no valid values are given, contact
for assistance.
For more information about using configuration items see
"Configuration Items" on page 87
Configuration Item
Meaning
ET_HSM_NETSERVER_OLD_WORKER_COUNT
Number of threads to reserve for processing old ProtectToolkit-C
remote client connections.
Default:
3
ET_HSM_NETSERVER_V2_WORKER_COUNT
Number of worker threads, per HSM, to reserve for processing new
net client connections.
Default:
10
ET_HSM_NETSERVER_READ_TIMEOUT_SECS
Number of seconds before a connection is timed out in a read
operation.
Default:
30
ET_HSM_NETSERVER_WRITE_TIMEOUT_SECS
Number of seconds before a connection is timed out in a write
operation.
Default:
30
Thales ProtectServer 3 HSM and ProtectToolkit 7 Installation and Configuration Guide
2021-06-30 10:29:48-04:00 Copyright 2009-2021 Thales Group
93
