Qty
Item
1
Friction Rail Mounting Bracket Set
See
"Using the Supplied Mounting Brackets" on page 41
for installation instructions. Set includes:
>
(2) side rails
>
(8) side rail screws
>
(2) sliding rear brackets (fit into the rails for rear support adjustable positioning)
CAUTION!
The included mounting hardware is meant for static positioning of the
appliance. The long tab that slides into the bracket, applied to each side of the appliance,
is adjustable for fitting the appliance into racks of varying depth - it must not be used to
extend the appliance out of the rack.
Optional gliding rails with rolling bearings are available for situations where rolling
excursion of the appliance, while attached to the rack, is required for maintenance. See
"ProtectServer 3+ External Required Items" on page 36
.
1
Friction Rail Rack Mounting Screws/Cage Nuts
Set includes:
>
(8) M5 cage nuts
>
(8) M5x14 rack screws
If you did not receive this set, you can request one from Thales (part number: 216-000035-001) or obtain
your own suitable screws/nuts.
Thales ProtectServer 3 HSM and ProtectToolkit 7 Installation and Configuration Guide
2021-06-30 10:29:48-04:00 Copyright 2009-2021 Thales Group
38
