SIGMA PLUS
– Wireless weather station
SIGMA PLUS
– Wireless weather station
15
14
Time zone setting
• The time zone is used for the countries where the DCF sig-
nal can be received but the time zone is different from the
German time (e.g. + 1=one hour later). Press MODE button
until ZONE is displayed. Hold MODE button for 2 seconds.
Press
▼
or
▲
button to adjust the time zone in intervals of
30 minutes.
4.2 Alarm Clock Function
• Select your desired alarm time by the ALARM ON/OFF
button:
1. W =
Weekday Alarm (only on weekdays)
2. S =
Single Alarm (once)
3. PRE-AL = will be activated if outdoor temperature
is under or equal zero degree
• Set the alarm time in the desired alarm mode. Hold ALARM
ON/OFF button for 2 seconds. The hour digits are flashing.
Press
▼
or
▲
button to adjust the time. Confirm with
ALARM ON/OFF button. Set minutes in the same way. In
PRE-ALM mode you can choose to be awaken 15, 30, 45, 60
or 90 minutes earlier.
• To deactivate the respective alarm function press
▼
button.
OFF appears on the display. To activate press
▲
button. The
corresponding icon appears or disappears on the display.
• Once the alarm starts to ring, you can activate the snooze
function by pressing the top button SNOOZE. The alarm
will be interrupted for 8 minutes.
• If you leave the alarm sound on for 2 minutes, it will enter
snooze mode automatically with maximum 3 times.
4.3 Display of date
Each press on the MODE button will change the display bet-
ween:
• Clock with hour, minutes and seconds
• Clock with hour, minutes and day of week
• Zone time with hour, minutes and day of week
• Zone time with hour, minutes and seconds
• Day and month
4.4 Thermometer and hygrometer
4.4.1 Display change
• Press CHANNEL button to change between the outdoor
transmitters CH1, 2 or 3.
4.4.2 Trend pointers
• The trend pointers displayed on the LCD indicate if the
trend of temperature and humidity is increasing, steady or
decreasing.
4.4.3 Comfort zone
• There are 3 different indicators for the comfort zone of
indoor climate:
COMFORT:
Ideal values (20-25°C/68-77°F, 40-70%)
WET:
Too wet (> 70%)
DRY:
Too dry (< 40%)
4.4.4 Maximum / Minimum function
• Press MEM button to show the minimum (MIN) values of
temperature and humidity of indoor and outdoor trans-
mitters. Press MEM button again to show the maximum
(MAX) values.
• Hold MEM button for 2 seconds to clear the recorded
maximum and minimum reading.
4.5 Weather Forecast
• There are 5 different weather symbols (sunny, slightly
cloudy, cloudy, rainy, heavy rain) and 3 different symbols
for the trend of atmospheric pressure (increasing, steady,
decreasing).
• The weather forecast relates to a range of 12 to 24 hours
and indicates only a general weather trend. The accuracy
is about 70 %.
4.6 Outdoor thermo hygro sensor
• By pressing the pick hole on the sensor unit with a poin-
ted object the temperature unit on the sensor display can
be changed from °C to °F.
• Press RESET to re-start in case of problems.
TFA No. 35.1063 Anleitung 21.09.2009 11:39 Uhr Seite 8
