Textron PT-3500, Operator'S Manual

Page: 52 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 50
Operation
Towing and Road Safety
Connecting to the Tow Vehicle (cont.)

After trailer is secured to the vehicle, stop
the machine/unit engine, and remove the
key from the ignition key switch.

Attach the break-away switch cable to the
tow vehicle.

Properly connect the safety chains by
latching in a crisscross pattern, as this
provides added directional control. The
safety chains should be crossed and short
enough to prevent the tongue from
digging into the ground, should the unit
unintentionally become disconnected
from the hitch. The chains should be no
longer than necessary to allow slack for
turning.

Connect the electrical plug to the tow
vehicle and check:
o
Clearance lights
o
Brake Lights
o
Turn Signals
o
Brakes
(For issues see Trailer Assembly section.)

Remove and stow the wheel
chocks
Unless otherwise indicated by applicable
laws, posted speed limits, or cautionary
conditions (stated above), a recommended
maximum safe operating speed for normal
road conditions is 50/55mph for night/day
conditions
and 30mph in residential,
urban, and business districts .
CAUTION: Do not tow the machine/unit unless all
the trailer lights and brakes are working correctly.
NOTE: When towing the machine/trailer assembly,
the driver should be knowledgeable and obey all
applicable transportation laws and speed limits.
Laws for towing speed of trailers differ widely
between states, provinces, and localities.
CAUTION: Drivers should use caution and drive
slower at night and when hazardous conditions are
present, such as heavy traffic, bad weather, or
uneven or rough terrain.