Textron PT-3500, Operator'S Manual

Page: 117 / 136

Revolution Series PT-3500 / PT-7500 Puller Tensioner Page 109
Maintenance
Pre-Operation Inspection Checklist
(Page 3)
13.
Inspect Fire Extinguisher.
a. Inspect fire extinguisher charge, and ensure that
gauge shows within charge limits.
b. Inspect the physical condition of the extinguisher- (cylinder, hose/cone assembly, etc.),
for any signs of damage or corrosion.
c. Ensure that hinge pin is in place, to prevent accidental discharge.
d. Ensure that the plastic safety seal is secured to hinge pin, and that
it has not been removed.
e. Inspect mounting strap/bracket assembly to
ensure extinguisher is secured to structure.
NOTE: If safety seal is missing or is broken, extinguisher may have been
tampered with or have already been used- indicating the need for re-
inspection/replacement.
NOTE: If undercharged or overcharged, see instructions
on label- replacement may be required. (Additional
minimum monthly/annual inspections required- see
instruction label on extinguisher for details.)