Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344, Safety, Operation & Maintenance Manual

Page: 76 / 236

en-76
8 MAINTENANCE & LUBRICATION
A
B
8.4 ENGINE COOLANT ____________________________________________________
Check Engine Coolant Level
(a) The level of coolant in the expansion tank must
be between the MAX and MIN level indicators
when cold.
(b) If topping up is required, remove the plastic cap
and top up using the correct anti-freeze mixture,
see section 8.1.
(c) Replace the plastic cap when finished.
Changing Coolant
(a) To drain coolant, open cock on engine block (A)
and remove hose from radiator (B). Collect
coolant using a suitable container.
(b) Close drain cock on engine block (A) and replace
hose back on to radiator. Ensure all hose clips are
tight.
(c) Refill the cooling system with the correct anti-
freeze mixture, see section 8.1. Fill system
through expansion tank.
(d) The level of coolant in the expansion tank must
be between the MAX and MIN level indicators
when cold.
(e) Run the engine for approximately 5 minutes or
until the thermostat opens.
(f) Check level of coolant in expansion tank and top
up if necessary
CAUTION
Contact With Anti-freeze Can Damage
Your Skin. Use Gloves When Working
With Anti-freeze. If You Come In
Contact With Anti-freeze, Wash It Off
Immediately.
CAUTION
Dispose Of Used Anti-freeze in Accordance With
Local Regulations