en-44
6
CONTROLS
WARNING
If incorrectly used this machine can cause
severe injury. Those who use and maintain
this machine should be trained in its proper
use, warned of its dangers and should read
the entire operators manual before attempting
to set up, operate, adjust or service the
machine.
Service required in
123 hours.
Contact service Engineer.
6.2J VISUAL DISPLAY ______________________________________________________
Is activated when the ignition is switched on.
6.2J.1 START UP SCREEN __________________________________________________
Upon initial power up this screen will be shown.
The hour meter will show total engine running hours.
6.2J.2 WARNING/SERVICE SCREEN__________________________________________
After the start up screen, the warning screen is shown.
If the machine is within 5 hours of the next service interval, a warning is
shown. An operator input is needed to continue to the main screen for
operation. Otherwise the main run screen appears. If a fault condition
has occurred during the previous start, a pop up screen over the top of
the warning screen shows the fault. The operator must confirm the
fault, to continue to the main screen.
1234.5
Summary of Contents for Jacobsen Ransomes Parkway 3 Meteor LGNN344
