TEXIO FGX-2220, Instruction Manual

Page: 198 / 229

185
Example SOUR1:BURS:TRIG:SLOP ?
NEG
The trigger slope is negative.
8-15-10. SOURce[1|2]:BURSt:GATE:POLarity
Set
Query
Description In gated mode, the function generator will output a waveform
continuously while the external trigger receives logically true
signal from the Trigger INPUT terminal. Normally a signal is
logically true when it is high. The logical level can be inverted
so that a low signal is considered true.
Syntax SOURce[1|2]:BURSt:GATE:POLarity
{NORMal|INVertes}
Parameter NORMal Logically high
INVertes Logically low
Example SOUR1:BURS:GATE:POL INV
Sets the state to logically low (inverted).
Query Syntax SOURce[1|2]:BURSt:GATE:POLarity?
Return Parameter NORM Normal(High) logical level
INV Inverted (low) logical level
Example SOUR1:BURS:GATE:POL?
INV
The true state is inverted(logically low).
8-15-11. SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe
Set
Query
Description Sets or queries the trigger edge of the trigger output signal.
The signal is output from the trigger out terminal on the rear
panel. The default trigger output slope is positive.
Immediate 50% duty cycle square wave is output at
the start of each burst.
External Trigger output disabled.
Gated mode Trigger output disabled.