153
8-9-2. SOURce[1|2]:AM:STATe
Set
Query
Description
Sets or disables AM modulation. By default AM modulation is
disabled. AM modulation must be enabled before setting
other parameters.
Note
Burst or sweep mode will be disabled if AM modulation is
enabled. As only one modulation is allowed at any one time,
other modulation modes will be disabled when AM modulation
is enabled.
Syntax
SOURce[1|2]:AM:STATe {OFF|ON}
Example
SOUR1:AM:STAT ON
Enables AM modulation.
Query Syntax
SOURce[1|2]:AM:STATe?
Return Parameter 0
Disabled (OFF)
1
Enabled (ON)
Example
SOUR1:AM:STAT?
1
AM modulation mode is currently enabled.
8-9-3. SOURce[1|2]:AM:SOURce
Set
Query
Description
Sets or queries the modulation source as internal or external.
Internal is the default modulation source.
Note
If an external modulation source is selected, modulation depth
is limited to ± 5V from the MOD INPUT terminal on the rear
panel. For example, if modulation depth is set to 100%, then
the maximum amplitude is +5V, and the minimum amplitude
is -5V.
Syntax
SOURce[1|2]:AM:SOURce {INTernal|EXTernal}
Example
SOUR1:AM:SOUR EXT
Sets the modulation source to external.
Query Syntax
SOURce[1|2]:AM:SOURce?
Return Parameter INT
Internal
EXT
External
Summary of Contents for FGX-2220
Page 1: ...B71 0406 01 INSTRUCTION MANUAL ARBITRARY FUNCTION GENERATOR FGX 2220...
Page 98: ...85...
Page 137: ...124...
Page 227: ...214 9 2 External Dimensions Figure...