146
8-7-4. SOURce[1|2]:DCOffset
Set
Query
Description
Sets or queries the DC offset for the current mode.
Note
The offset parameter can be set to MINimum, MAXimum or
DEFault. The default offset is 0 volts. The offset is limited by
the output amplitude as shown below.
|V
offset
| < V
max
– Vpp/2
If the output specified is out of range, the maximum offset will
be set.
The offset is also determined by the output termination (
50Ω
or high impedance). If the offset has been set and the output
termination has changed from 50Ω to high impedance, the
offset will double. Changing the output termination from high
impedance to 50Ω will half the offset.
Syntax
SOURce[1|2]:DCOffset {< offset> |MINimum|MAXimum}
Example
SOUR1:DCO MAX
Sets the offset to the maximum for the current mode.
Query Syntax
SOURce[1|2]:DCOffset? {MINimum|MAXimum}
Return
Parameter
<NR3>
Returns the offset for the current mode.
Example
SOUR1:DCO?
+3.0000E+00
The offset for the current mode is set to +3 volts.
Summary of Contents for FGX-2220
Page 1: ...B71 0406 01 INSTRUCTION MANUAL ARBITRARY FUNCTION GENERATOR FGX 2220...
Page 98: ...85...
Page 137: ...124...
Page 227: ...214 9 2 External Dimensions Figure...