manualshive.com logo in svg

Texas Instruments TVP4020 PERMEDIA 2, Reference Manual, Page: 286 / 323

Share
Download
Texas Instruments TVP4020 PERMEDIA 2 Reference Manual Download Page 286

TVP4020 

Programmers Reference Manual

 

A Gouraud Shaded Triangle

277

Figure D2

Screen aligned trapezoid and flat topped triangle

D2

Initialization

P

ERMEDIA

 requires many of its registers to be initialized in a particular

way, regardless of what is to be drawn; for instance, the screen size and
appropriate clipping must be set-up. Normally this only needs to be done
once and for clarity this example assumes that all initialization has
already been done. More details may be found in the chapter on
initialization, chapter §6.

Other state will change occasionally, though not usually on a per
primitive basis, for instance enabling Gouraud shading and depth
buffering. A detailed treatment will be found in later sections of this
chapter, and details are not included here.

D3

Dominant and Subordinate Sides of a Triangle

The dominant side of a triangle is that with the greatest range of Y
values. The choice of dominant side is optional when the triangle is
either flat bottomed or flat topped.

P

ERMEDIA

 always draws triangles starting from the dominant edge

towards the subordinate edges. This simplifies the calculation of set-up
parameters as will be seen below.

Dominant 
Side

Subordinate

Sides

Dominant 
Side

Subordinate 

Side

Subordinate 

Side

Figure D3

Dominant and Subordinate Sides of a Triangle

Summary of Contents for TVP4020 PERMEDIA 2




































































































































































































































































































































Reviews:

No comments