manualshive.com logo in svg

Texas Instruments TVP4020 PERMEDIA 2, Reference Manual, Page: 10 / 323

Share
Download
Texas Instruments TVP4020 PERMEDIA 2 Reference Manual Download Page 10

TVP4020 

Programmers Reference Manual

Introduction

1

Appendix D describes how a Gouraud shaded triangle can be rendered
without using the Delta Unit. This is helpful in understanding how the
chip works and
also when dealing with TVP4010 legacy.

Appendix E tabulates the TVP4020 registers.

Appendix F describes the differences between TVP4010 and 2

A Glossary of technical terms follows the Appendices.

An extensive index is included.

1.2 

Further Reading

•

  TVP4020 Data Manual, Texas Instruments

•

  TVP4020 Architecture Overview, Texas Instruments

•

  OpenGL Programming Guide, Jackie Neider et al, Reading MA:

Addison-Wesley

•

  Microsoft WIN32 Software Development Kit 3.1, Microsoft

•

  Windows NT 3.1 Graphics Programming, Emeryville CA, Ziff-Davis

Press

•

  Computer Graphics: Principles and Practice, James D. Foley et al,

Reading MA: Addison-Wesley

•

  Programmer’s Guide to the EGA, VGA and Super VGA Cards,

Richard F. Ferraro, Reading MA: Addison-Wesley, ISBN 0-201-
62490-7

Summary of Contents for TVP4020 PERMEDIA 2




































































































































































































































































































































Reviews:

No comments